In-house news, industry stories and on-the-road updates:
E-Z Anchor Puller is dedicated to great customer service, support and providing resources for our customers online. Our ever-expanding Knowledge-Base Blog can be accessed by typing a question in the website search bar. We also have a Support Tab that gives the customer downloadable manuals, drawings and more. Monday - Friday, 9 a.m. - 7 p.m. EST, call us toll-free at 1.800.800.1640.
Downloadable Resources: ...
The shock load is mostly absorbed in the nylon rope that is used between the dyneema or spectra line and the chain...
To view the anchor rode and chain capacities specified to each unit, view...
...More Handy Hints for Installation:
1. Gearbox output multi-position flange (page 2) to drum bracket can rotate in eight different mounting positions for your motor and gearbox components
2. The drum must be in-line and centered to the guide roller or hawsepipe and bowsprit to ensure an even spread of the rope and chain to the drum.
3. Ensure sufficient room to run electric cables to the drum anchor winch. Follow the instructions in the manual including under-deck stiffening, alignment, mounting blocks and sealing procedures.
4. Both exposed wires from the winch motor must be connected via joiners/solder and then heat shrink, including internal silicon to wires (see cable chart, page 7 in Drum Anchor Winch Manual) to eliminate corrosion or water entering wires.
It is very simple to Change from Direct Drive to Free Fall
To raise and lower your clutch block simply loosen the set screw and move the block up to the top of the slot.