Knowledge Base - Change from Direct Drive to Free Fall

December 11, 2020

If you choose to temporary suspend the Auto Drop FREE FALL feature and operate in a "power down" mode, just loosen the clutch block set screw on the side of the base-plate and lower the clutch block preventing it from interacting with the clutch plate. Once you wish to return Auto FREE FALL, just raise the clutch block to the top of the slot and tighten the set screw.

Rebel Series drum anchor winch - how to make direct-drive to free fall

Raise the clutch block so the pin makes contact with the block and it is then able to be used in free fall again. If you want to operate in direct drive again, simply lower the clutch block so that the pin in the clutch plate cannot make contact with the block and it will be direct drive.

 


Leave a comment

Comments will be approved before showing up.