Knowledge Base - Calibrate the Wireless Remote Fobs to the Wireless Receiver Box

March 19, 2021

Step 1: Remove the cover of the wireless receiver box unit and locate the black button across from the exposed wires. Have your wireless remote key fobs nearby.

Step 2: Press the black button on the open coverwireless receiver unit until the red light blinks.

Step 3: Once the previous step is complete, press any key on your key fob until the red light on the receiver flashes a quick, 4 - 5 blink sequence. Repeat this step with the second key fob. The wireless remote system should now be paired. Test the remote and call the manufacturing company if the wireless remote system is still not working correctly.


Leave a comment

Comments will be approved before showing up.