Knowledge Base - Troubleshooting Basic Motor Issues

February 04, 2021

If the motor is not operating correctly, possible causes may be an inoperative or stuck solenoid, inoperative switch, inoperative motor, or loose connections.

Try jarring the solenoid to free the contacts, if solenoids operate, check for voltage and tighten connections on the motor. For more detailed information on how to identify and remedy the problem, please refer to the E-Z Anchor Puller anchor winch manual, linked here.

Common Page References:

  •  Troubleshooting Guide….page 11 
  • Test procedure for motor….page 12 
  • Test procedure for solenoids ….page 13 
  • Solenoid Assembly Parts …page 21

 

 


Leave a comment

Comments will be approved before showing up.