Our anchor rope comes cut to length, on a drum with a thimble on one side ready to be spooled onto your E-Z Anchor Puller!
Replace your aging or worn-out marine anchor rode with E-Z Anchor Products Premium Three-Strand Nylon line. This high-quality nylon anchor line is designed to handle the dynamic shock loads caused by boat motion and is treated for maximum abrasion-resistance. Each boat anchor line is factory eye-spliced with a high-quality stainless steel thimble at one end and a heat-sealed bitter end. We package a variety of sizes and lengths to accommodate all your anchoring needs.
|3/8" / 8 mm||270' 315' 385' 450'|
|1/2" / 12 mm||185' 225' 265' 315' 425' 575'|
|5/8" / 16 mm||170' 200' 275' 325' 600'|
|3/4" / 20 mm||225' 400' 650'|
|7/8" / 24 mm||275' 450'|
|1" / 25.4 mm||345'|
|Buy Now !|
EZ Anchor Products chains are top quality DIN 766 and USA standard calibrated chain for use on EZ Anchor Products anchor windlasses. For the windlass to run smoothly, the chain needs to match the gypsy. The chain stows itself in the windlass gypsy and the weight causes it to drop through the chain pipe. Chain is favored by many cruising boaters, it is compact in size, highly abrasion - resistant and lies firmly on the bottom in most conditions. EZ Anchor Products chains are adjusted and calibrated according to the DIN 766 and USA standard. Available in hot dipped galvanized steel and stainless steel.
|QS-SS-01||1/4" / 6 mm||15' / 4.5 m||DIN 766 Standard / Stainless Steel|
|QS-SS-02||5/16" / 8 mm||15' / 4.5 m||DIN 766 Standard / Stainless Steel|
|QS-SS-03||3/8" / 10 mm||15' / 4.5 m||DIN 766 Standard / Stainless Steel|
|QS-GV-01||1/4" / 6 mm||15' / 4.5 m||DIN 766 Standard / Galvinized|
|QS-GV-02||5/16" / 8 mm||15' / 4.5 m||DIN 766 Standard / Galvinized|
|QS-GV-03||3/8" / 10 mm||15' / 4.5 m||DIN 766 Standard / Galvinized|
|Buy Now !|